Custom Earth Toa !

✨Custom earth Toa !✨

It’s spiky ! And we’re now at 5/6 !

More below !

Front/back :

He’s spiky ! Some might have already noticed I took for base the old Von Nebula set, because I acquired it recently and it worked well, plus the joints are interesting. Pretty much everything else was change, though I kept the mask, sphere, and spiky plates. These were nice, and even if stone colours are usually black and purple, but blue works well too.

I relocated the sphere directly in the thorax so that it looks like some kind of core. The back is mostly composed of two large car pieces.

The hands are using black pieces to make them larger, which works well with the blue blades (which supposedly come from either Chima or Hero Factory, I can’t remember).

Leg :

Another type of Bohrok piece to act as feet ? Yes. These are the head pieces, and they work well with a classic foot as a back piece. The piston in the leg was there originally, but I covered it with these large technic panels and some other technic pieces.

There is also an interesting mechanism to stop the legs from doing too odd moves on top, which can have some interesting applications. Here, I’m wondering about removing them to gain a larger range of movements though.

Head :

Kept the original mask and teeth, but with a cable and a spider’s claw to elongate it.

This picture also allows for a clear view of how much dust has accumulated. Don’t judge me, these are on a top shelf which isn’t the easiest to clean…

Also, my project is now finished (officially) ! I went to a small exhibition with it this weekend actually, and…a recruiter from a much larger exhibition found it good enough to offer me a place next month (I’ll post it here once the bionicle series is done) ! I also brought some of my pride flags, which seemed to be doing their effect, so I’ll bring more next time. So overall, yay !

✨Custom water Toa !✨

Another one ! (Slightly less giant)

Details below the cut !

Front/back views

That one, too, is experimental, albeit in another style. I tried to remain closer to actual Bionicle size this time. Many fun details and technics here, so we’ll go from the feet all the way toward the head.

So, starting with the feet ! I have a complex of normal feet and Visorak legs held by a single connector. They have a wide angular range, but given that the connector connecting the socket to the feet is alone, a foot can also have a 360 rotation angle horizontally (not natural-)

The legs don’t have much special traits, except the upper legs using two socket with axle holes on top and a silver foot as armor on the side.

The body is where things get interesting. The Rahkshi silver shell is held by the silver claw above it at a chest plate, while part of the back is hidden behind a Rahkshi foot. The body is very triangular because it’s framed by these sockets with a silver piece in the middle, which gives it a nice aesthetic. The arms are an equivalent, with some tubes directly in the shoulders to offer a flexible piece which also limits the movements.

Finally, the head is not a head. I’ve made it like that because of the translucent Kanohi, that way it looks brighter, the inconvenient being that the backside of the head is quite literally an empty shell.

Now for the lower part of the arms : no socketed hand because who needs hands when you have a trident (bident ?) ! The main piece obviously comes from a Rahkshi, and the magic is wishing the silver connector. It used to be a lightsaber hilt from the larger Star Wars figs, but it looks good practically everywhere, including here !

Also, here below is a picture of the angle range of the arms (not much, oops).

✨Another edited photo, yay !✨

This is an entire version of the blog’s banner, too !

Technic details under the cut !

So ! Looking through my archives, I found images for the process I described in my previous similar post, including my made up studio (and very messy desk…) :

As you can see, it’s not quite a professional set up..

To be more precise, this is three led bands hooked to a power bank, on top of which my phone is meant to be sitting to take two photos in a row. Obviously, there is also a desk lamp illuminating the scene, so here is a picture without it :

So, the way this is organised is that I have my black screen in the background which reflects the lights a little, but not the actual minifigs; the characters are held by transparent pieces connected to ball joints, so that I can have a steady but adjustable display. Light-wise, the two prominent led bands are colour-coded with the character’s color (kinda) to get them in opposition; the junction between the two is covered by some black bricks to create a darker area to offer more contrast; ans on top of the stage is help a (theoretically) white led with lesser intensity to make sure the scene stays lighted up properly, even if the light sources are from underneath. The red pieces I have used as frames are really good to hold these light bands, because I can have varied angles and heights plus a very solid structure, which is all I want.

Finally, to get the floating render, I take a first shot with the characters, then a second one at the same place without the characters :

And then, with a bit of editing magic and other simple image manipulations, you get the result I have at the top of the post ! I’d recommend trying it for yourself, because it can be a lot of fun !

Get booped

Get booped back ! Ah !

Oh, and have an actual (Lego) cat while I’m at it !

✨Clone wars diorama !✨

Another one, technically the largest I have posted (yet~), featuring the 212th and a (placeholder) Jedi.

Of course, closeups and additional details below !

Views from directly in front/above :

Before I continue, I must confess it. This horrendous mistake, which you might spot by paying close attention to the right part of the image.

Yes. I somehow created an offset on the entirety of the wall’s height.

Overall, I’m quite happy with this one, mostly the environment, which turned out great (except for the offset….). What I’m not really sure leases with are the cheap AT-RTs from the battle packs, which are too bulky, but it works well enough for the moment, and since I’m not exposing to any connoisseur, it does the job.

Most of the minifigs are from these battle packs too, except for the Jedi, which is actually a savage oppress with a cloak, but every time I try to just remove the minifig, it feels like something is missing. The paratrooper captain has the hold grey kama and pauldron which always work well, even if it could have done with an additional visor.

Anyway, let’s get going with the closeups !

AT-RT scenes :

On the left, an engineer (my favorite kind of clone) fixing a broken down leg, with the help of one of the pilots. It was hard to get the minfigs in a 'lively' position, and the photo doesn’t render it correctly. The small white backpack is a piece I’ve stolen from the 501st specialist pack, because it’s nice.

On the right, a paratrooper with a completely inaccurate rocket launcher (the clone wars’ ones don’t look as cool, though). I quite like the way this part came together, even if it’s just a small detail.

Explosion scene :

I’ll admit it’s my first try with building explosions, and I’ll hopefully improve.

On the right, the clone says hi ! Well. No. He doesn’t, but it’s what he looks like on the photo, which I funny, I’ll admit, but not the image I wanted to convey, even if technically he’s set properly, as a projectile caused by the explosion.

The picture on the right convey the feeling of movement much better, with the clone shooting on the left, the others running along, and the paras being blown.

Other scenes :

The focus on the left is the droid ! I really like how it’s sprawled over that rock. Other droids can be found in the diorama, notably one being crushed by the rocket launcher AT-RT, partially under a rock, and part of one in the explosion.

On the right, we see a paratrooper down (but still fighting !) with, at his side, a medic applying a hypo. While it’s hard to see with this picture, he has a pouch at his side, and some chroma-black legs, because I was missing a pair of legs the medic has prosthetic legs, isn’t that awesome and convenient ? That is a lesson to learn, any lack can become lore ! Well, kind of. It’s what I also did with the Kashyyk MOC : I was missing all but the helmet of my ninth minifig, so I turned it into a grave of the missing squad member.

✨Yet another combat mech !✨

A bit of laziness here, I couldn’t bring myself to get proper pictures, so I got old ones from when one of my LEDs broke, hence the blueish lighting-

Lore and closeups below, and previous work here !

Mech closeups :

Pilot closeup :

Lore time (world explanation in previous works..) !

So, Scorcher (the mech) is terrifyingly large, next to most others, which is already impressive, but it’s also one of the most equipped ones on the field : large circular saw, flamethrower, integrated calculation computer, you named it. The only real weak point is the reservoir in the back, which is what the flamethrower is powered by, and it’s hard to reach because one has to get behind Scorcher to get it.

The pilot is well equipped too, with last gen holographic equipment and a powerful high resolution display helmet, under which he somehow manages to fit all his hair. But he’s not alone, since he also have an entire team behind him (called Dragon, for obvious reasons), which helps him during and outside of combats, making this make one of the bests there are.

Unrelated to the lore, the large dome used for the head falls off every time I try to move something. It may have plot armor in the lore, but in real life I think a fly could beat it. Most of these joints are rigid, except at the waist, which is a mistake I probably won’t make ever again, it’s terrible. I’m also glad I stole the arms of another minifig for this one, because it was quite bland with purely red arms.