This Is The First Dragon Tail Commission This Month! Its Made Of Anodized Aluminum, Primarily Black With

This is the first dragon tail commission this month! It’s made of anodized aluminum, primarily black with a purple underbelly. It’s got a full line of chrome spikes down the spine. It’s also got a lobster clasp at the tip to attach things to. It measures in at 37 inches long, and weighs 4 lbs 1 oz.

Tail #2 coming up shortly!

While I had a pile of dragon tails on hand, I just figured I would get some shots of them all together. We got the small in blackened steel and anodized titanium, the medium in black and green, and the large in yellow orange and red.

Aren’t they adorable when they cuddle together like that?

This dragon tail has a golden flame pattern to it. Made of anodized aluminum scales, mostly yellow/gold with some orange and red. And it has a spade tip made of fluorescent orange acrylic plastic.

It measures in at 32 inches long without the spade tip, 35 with it, and weighs 2 lbs 15 oz.

I’d fallen a bit behind, but nearly finished up March’s commissions in time. I’ve got 2 more tails incoming.

I’ve got a dragon tail to sell! It’s red with black on the spine, with an underbelly of pink bright aluminum scales. Very shiny!

This tail had been made for a commissioner, who then was unable to pay. It’s been sitting in my room for a while, and it’s time to cash it in!

The commissioner had wanted a leather spade tip with a custom shape, which I made, but I didn’t really like it, so instead I’m offering it with both the arrow and heart shapes, but in acrylic plastic rather than the leather that most people get. 

It’s for sale over on my Etsy page! Jump on it quick, before that other guy gets it!

I do hope to open up for commissions in not too long, but I need to finish dealing with a few projects currently owed to people.

Finally put ears on this dog mask/pup hood! 

This was a prototype/first run at making a mask in this style, with snout in front and buckles in back. It worked out pretty well, and I think the buckle arrangement looks pretty clean. The snout and ears both detach with snaps, which felt like it was a good way to start thinking about modularity. And there’s enough room in the eye area that it fits on over my glasses, which I think is pretty cool. The snout is open at the bottom, which is pretty comfortable, but the snout is deep enough that it doesn’t really expose the chin very much. And the base structure should be able to support different types of snouts.

The only thing I’m a little bit skeptical of is the ears. I wanted to try a minimalist construction, and it seems to work with just 2 points of attachment (which pivot too, being snaps). But the shape is maintained by stress in the curved segment between the snaps, and I’ll have to see how that holds up when the ears get bonked. But if it does need some adjusting, they’re removable, so that’s easy.

The next mask I make with this structure I’m going to adjust how the straps attach to the mask. Here they’re just riveted directly to the mask. Next time I’ll attach D-rings to the mask and attach the straps to those. That’ll let them pivot around that point, rather than needing to be lined up to point in just the right direction. 

Mask was made by hand from 4 oz vegetable-tanned leather, stained black. I’ll finish it with neatsfoot oil, which’ll darken it up a bit more and make the surface a bit more supple. Rivets and snaps are nickel-plated steel.

I just got trash talked and I had to share.

I got someone talking shit about my chainmail in a personal note over on Etsy, and I ended up writing way too involved a response. I probably should’ve just responded with “How about you go order a steaming plate of Go Fuck Yourself to go.” But I was in A Mood, so I wrote like a whole essay about my standards and priorities as a craftsperson. And I kind of like to share those sorts of things publicly from time to time, so here you go. If anyone else would like to send some trash talk at me, feel free to try your luck.

[Redacted]:

www.etsy.com/listing/78305616/european-6-in-1-bracelet-stainless-steel

with all your talk about precision lasers and whatnot, what explains the presence of pinch-cut rings on your pieces, the ugliest and least precise way of producing jump rings (never mind the gaps and bad closure i see)?

Hi [Redacted].

You seem angry about this. I'll try to address the different points you brought up:

• I'm not drawn to laser cutters because of some fetishization of precision. I'm drawn to them because they allow me to make things that would not be possible otherwise. But laser cutters and chainmail have basically nothing to do with each other, so that's a whole different conversation.

• When crafting items to sell, there is a balance one must find between the time put in and the price a customer will pay for it. With chainmail, a customer may notice sloppy work if the rings are not closed in-plane and they scratch a bit. But once you're at an acceptable solid level of quality, there's no reason to put in extra anguish if it doesn't improve the customer's experience of the product. Put simply, it's not about absolute perfection, it's about efficiency and managing your standards.

• I don't consider the shear-cut rings I use to be ugly. People on chainmail forums may deride them and extol on the virtues of saw-cut rings, but honestly I don't mind them. As a matter of principle, I'm totally fine seeing evidence of how an item was made, and that's how I think of the pinching at the shear points of these rings.

• Back when I started chainmail I was hand-wrapping and cutting rings with wire cutters. Sometimes I would slip up and get some variations in ring sizes, but I was pretty accurate at cutting straight along the coil to produce pretty consistently-sized rings. But as soon as I started selling stuff, I switched to buying pre-cut rings from The Ring Lord, and I've never detected any variation in size between rings. Their manufacturing tolerances are good.

• Also, saw-cut rings are more expensive than shear-cut rings, and I don't think they're worth it.

• The vast majority of the chainmail I make is larger costume pieces, usually with scales, where the rings aren't even visible. There's no reason to use saw-cut for those. I sell a decent number of the small scale bracelets, but I sell very few ring-mail jewelry pieces. Even if I did want saw-cut rings for jewelry, for the amount that I'd use them, it's really not worth stocking them.

• A couple times I did get some saw-cut rings. What I found was that they were more prone to being scratchy. The metal at the cut point on the shear-cut rings is bent inwards a bit, so the joint is rounded over. But the edge of the saw cut is sharp, so a minuscule error in closure is immediately evident because it scratches. And even if your closures are perfect, sometimes the rings have little burs poking out parallel with the cut, which will scratch no matter how long you spend exquisitely closing your rings. That sucked, and I didn't order saw-cut rings again after that.

• My closures are fine. I hold myself to a pretty high standard when I close rings. If the ring isn't springing closed, pushing itself to close harder than flush, I worry that a scale will eventually force its way in and open it up. I've never had that happen, but that's why I'm careful.

• When I see other chainmail people at craft fairs, I silently judge their closures. I'm frequently disappointed. The worst disappointment was a guy who sells lots of ring mail at a fantasy convention that's in Boston every year. He uses like 12 gauge 1/2" diameter aluminum rings. Really big. And he will boast about working out a fast method of opening and closing rings with only one pair of pliers. But his closures are shit. None of the rings touch themselves, some of them there's up to like 1/16 inch of a gap. But you know what? He sells big armor pieces. Nobody is looking at them that closely. They're closed well enough that there isn't a danger of rings slipping loose. It's not affecting the function or appearance of his product. It doesn't matter.

I'm assuming you're learning chainmail yourself. A layperson wouldn't have the vocabulary, and someone who had been doing it for a long time would have more tact. My advice to you is to keep looking at other people's work and thinking of how you could do better. That's how you improve. Think of what matters to you, what you want to optimize, what you want to explore. Myself, I care about making an impact with unique designs, especially with larger costume pieces. Some people really love working really small, making micro mail with tweezers. Some people are drawn to ornament, mixing weaves together with lots of draping chains. If you're drawn towards perfection of technique, maybe you'd want to make high price-point pieces in precious metals, maybe even exploring soldering each ring closed. When you have a goal or direction in mind, you can fit your own methods to that goal. And you realize that other people have different priorities, different optimizations.

Oh, and it may please you to know that in the full decade that I've been making chainmail, I truly cannot think of another person before you who has trash talked my work. Congratulations on being the first.

Feel free to let me know if you have any other questions!

-Jesse